Electric water heaters of different sizes in the wall and stand in two types of production is designed for diverse applications.
The boilers are different because of the size and fit in small confined spaces and can be installed and used.
Features Electric Water Heaters
The use of polyurethane insulation to prevent energy waste
Use the best type of permanent sequential elements to produce hot water
Use color-coated sheets for covering body
Use fire-resistant wire for internal bond strength against heat
Use grounding wire for more safety product
The use of hot galvanized steel for the main body of the reservoir
Electric water heater installation :
When installing the water heater should be displayed for use
Product installation location should be level with the ground
Select the installation location so sprinkled or poured water on the tank, especially not the thermostat frame.
As far as possible to the water heater near the wall here.
Systems product in places where ground (earth) is not used.
Product installation should be done by the operator authorized or qualified personnel.
Storage should be in a position to sweep the water pipes to be connected to the thermostat and drain valve box that is available.
Before turning on the water of the reservoir and make sure the water flow and to prevent the return of hot water to municipal water mains must use the
3. Volume thermostat
4. Signal lights
5. Cold water inlet
6. Bead tips
7. Check valve
9. Frame thermostat
10. Pipe overflow valve
11. Hot water outlet
12. The location of Install drain valve
13. The location of the Earth
input Output : 3/4 inch
The thickness and type of sheet : 2 Galvanized
Valve : 3/4 inch
Technical specifications of electric water heaters solarkar
|SLE 200||SLE 150||SLE 120||SLE 90||model|
|220 V||220 V||220 V||220 V||voltage|
|50 Hr||50 Hr||50 Hr||50 Hr||Frequency|
|2500 W||2500 W||2000 W||2000 W||The element|
|150 lit||120 lit||100 lit||60 lit||Capacity|
|44 cm||44 cm||44 cm||44 cm||Diameter|
|138 cm||128 cm||113 cm||65 cm||Height|